Numa Concert/Stage

Downloads
Manuals
Firmware and updates
  • memoryNuma Concert OS

    2.3

    keyboard_arrow_down
    Update procedure
    1. Download the P Loader (if not already installed in your compouter), selecting the right version for your operating system and follow the related installation instructions;
    2. Download the latest version of the firmware "Numa Concert OS" and extract the files;
    3. Connect the USB cable to both the computer and the instrument;
    4. Power on the instrument while pressing the “System” button; the instrument’s display will show “SYS” and it will be ready for update;
    5. Open the PLoader, click the Connect button and wait until the instrument’s name appears on the related area (after a few seconds);
    6. Select Firmware and browse to find the related file;
    7. Start the download by clicking the related button/arrow;
    8. When the selected update is completed, the PLoader will show the message: “Done” and you can disconnect the instrument from the computer and switch it off. At the next Power ON, the update will be ready.

    Release note

    2.3
    This firmware allows to obtain an enhanced dynamic response and an optimized setting of the B/W keys balance at all levels; to verify your instruments firmware, press Function and SYS at the same time and read the number on the display; if version 2.3 is already installed you don't need to update it.


    Download

    file_downloadNuma Concert OS

  • memoryNuma Stage OS

    2.2

    keyboard_arrow_down
    Update procedure
    1. Download the P Loader (if not already installed in your compouter), selecting the right version for your operating system and follow the related installation instructions;
    2. Download the latest version of the firmware "Numa Stage OS" and extract the files;
    3. Connect the USB cable to both the computer and the instrument;
    4. Power on the instrument while pressing the "System" button; the instrument’s display will show "SYS" and it will be ready for update;
    5. Open the PLoader, click the Connect button and wait until the instrument’s name appears on the related area (after a few seconds);
    6. Select Firmware and browse to find the related file;
    7. Start the download by clicking the related button/arrow;
    8. When the selected update is completed, the PLoader will show the message: “Done” and you can disconnect the instrument from the computer and switch it off. At the next Power ON, the update will be ready.

    Download

    file_downloadNuma Stage OS

Sounds
  • music_noteFactory samples

    26/11/2019

    keyboard_arrow_down

    This sound bank can be installed only in case an instrument shows a corrupted file, that could create a wrong loop setting (for instance: a missing loop in the octave C7-C8 of a non-percussive sound like the Pads). We suggest to update the instrument only in case of a corrupted loop, since no other changes have been done on the samples.


    Update procedure
    1. Download the P Loader (if not already installed in your compouter), selecting the right version for your operating system and follow the related installation instructions;
    2. Download the latest version of the samples and extract the files;
    3. Connect the USB cable to both the computer and the instrument;
    4. Power on the instrument while pressing the “System” button; the instrument’s display will show “SYS” and it will be ready for update;
    5. Open the PLoader, click the Connect button and wait until the instrument’s name appears on the related area (after a few seconds);
    6. Select Samples and browse to find the related file;
    7. Start the download by clicking the related button/arrow;
    8. The Samples update might need approx one hour; when the selected update is completed, the PLoader will show the message: “Done” and you can disconnect the instrument from the computer and switch it off. At the next Power ON, the update will be ready.

    file_downloadDownload
Software
  • desktop_windowsP Loader

    1.0

    keyboard_arrow_down

    Ploader is a software tool to connect and update your Numa Concert or Stage with a computer.

    The updating files are of 2 kinds:

    1. Firmware (.fnc): to update functions (including effects) or the control panel;
    2. Samples (.cbs): to update all sounds data-base (if a new version is available).

    Choose you operating system

    file_downloadWindowsfile_downloadmac OS

Do you still need help?