SL Mixface

Firmware

## Release note ### 1.0.4 - Fixed an issue that could prevent some LEDs from working correctly. ### 1.0.3 - New supported DAW: Cockos Reaper. - Master slider has been disabled in Pro Tools, as safe settings. - *[FF]* and *[Rew]* can now be properly used in Pro Tools during playback. ### 1.0.2 - Now it is possible to quickly change the selected Zone during control mapping programming by pressing the Zone buttons. - The *Cubase* DAW type setting has been renamed to *Cubase-Nuendo*. - Fixed an issue that he prevented sending of PROGRAM CHANGE messages when a SL keyboards was connected. ### 1.0.1 - Fixed an issue that blocked some controls in DAW mode. - The port for the DAW connection has been renamed to USB Port 3. ### 1.0.0 Initial release. ## Update procedure 1. Download and install **Mixface Manager**. Get Mixface Manager 2. Download the firmware. SL Mixface Firmware 1.0.4 3. Connect SL Mixface to your computer via USB. 4. Turn on SL Mixface while keeping pressed the Encoder; the display will show the "Firmware Update". 4. Open Mixface Manager. 5. Set ***SLMIXUSB Port 2*** in both drop-down menus. 6. Select the firmare file (*.mix). 7. Click UPDATE and wait for the end of the procedure. 8. Restart the Mixface (off and on).