SL Mixface
Connect SL Mixface to a computer o mobile deviceFollow these steps to enable Bluetooth in SL Mixface and pair it to a device to use both Controller and DAW modes wirelessly.
## Enable Bluetooth in SL Mixface
1. Long press **\[EDIT\]** and then choose **Global settings**.
2. Go to **Bluetooth** and set Power to **On**.
3. Go to **DAW port and type** and Port to **Bluetooth** (if allowed for the selected DAW).
4. Return to *EDIT MENU* and choose **Zone edit**.
5. Change the type to **Bluetooth** for the desired Zones.
## Pair SL Mixface to your device
Make sure you enable Bluetooth on your device.
Then follow the instruction depending on the operating system.
1. Open **Windows Settings**.
2. Go to **Bluetooth and Devices**.
3. Press **Add devices** > **Bluetooth**.
4. Choose **SLMIX** from the list and enter the code *0000* if asked.
Windows 10 and Windows 11 natively supports Bluetooth MIDI communication but this specific function must be implemented by the app. Make sure your app allows Bluetooth MIDI devices.
1. Open the utility **Audio MIDI Setup** included in your Mac.
2. Click Window > **Show MIDI Studio**.
3. Double click **Bluetooth**.
5. Find *Mixface* from the list and click **Connect**.
iOS only allows Bluetooth MIDI communication if implemented in the app.
To pair SL Mixface, please refer to the specific app settings.
Make sure your app allows Bluetooth MIDI devices.